The surface of the heating cable must not exceed the maximum temperature of the constructional materials or the Temperature Classification if installed in a hazardous area. This is ensured by limiting the pipe or workpiece temperature to a safe level either by design calculation or by means of temperatue control devices.
Plastic Gland (PGS1)
| 
| | PGS1 is a hazardous area approved cable gland with a flat seal for use with flat profile heating cables. Cable glands can be used for entering cabinet boxes or enclosures. PGS1 has an M20 x 1.5 thread and the seal is made from silicone rubber to give a high temperature withstand.
PGS1 is designed specifically for the Heat Trace range of heating cables and is part of a Standard termination system. There are 3 plastic cable glands and each gland is specific to a range of cables. See table below. | |  |
| |
| Heating Cables applicable to PGS1 | Self-Regulating - Freezstop Micro FSM
(FSM-C,FSM-CT,FSM-CF) - Freezstop Lite FSLe
(FSLe-C,FSLe-CT,FSLe-CF) - G-Trace Extra GTe (GTe)
- Freezstop Low Voltage FLV
(FLV-C, FLV-CT, FLV-CF) - FailSafe+ FS+ (FS+C)
- Snomelt SM (SM-A)
| Constant Wattage - MicroTracer EMTS
(EMTS-C) - MicroTracer EMTF
(EMTF-C,EMTF-CF) - MiniTracer MTF (MTF-C)
- MiniTracer MTFJ
(MTFJ-C, MTFJ-CF) - PowerHeat PHT (PHT-N)
| | | |
Product, Application & Documentation Links | |
 |  | | | | | | |
| Associated Products | Termination Matrix | | | | | | |
Approvals and Certification
POCC GB.ÃÁ05.B02364, GB.ÃÁ05.B02366
Product and Application Datasheets
